Bi-Tron

Going into the test I had good hopes and positive feelings. Prior to putting the fuel conditioner, octane booster and the engine treatment in I had my car serviced so it was running nicely to begin with. I first put in all of the octane booster and 3oz of the fuel conditioner into my car after filling her up (says you should dose with every 10 gallons but my tank is only 11.5 gallons so it worked out. I had a normal week of driving and I usually average anywhere between 27-35 mpg (when I travel strictly on the freeway I can get her up to 40mpg).

Anyways after using all of my gas I filled her up and recorded the stats. I filled up 9.5 gallons at the station and saw that I had traveled 327.5 miles on that tank. That means I was getting slightly over 34 mpg. This was great as I was doing a lot of city driving and was expecting below 30mpg. Now, whether this was due solely to the products, or to the fact my car was recently serviced or both it was still a nice figure.

I also added the first dose of the engine treatment fluid and thrashed my RSX around town to see what’s what. I did this after my first tank so as not to tarnish the mpg test. Again, whether these results are due to the products, the service or both my car was screaming like I haven’t heard since I first bought het. All the way up to 8,250 rpm she was singing unhindered and beautifully. I was revving the shit out of her left and right and there were no jutters or any sign of work on her part.

Overall it is hard to tell after only a few weeks if performance enhancing products do much on your car but I have to say so far I am overwhelmingly pleased and would recommend this to everyone I know. Application wise it was easy to apply the products and had no hassles on that end. I’m really enjoying my car now more than ever, a little too much as I got a speeding ticket the other day hehe. But in conclusion Greg it was all positive and I will keep you posted in the weeks to come.

Bi-Tron product testimonial

Caterpillar 12H

Customer: Cyril Vale – Owner

Mendip Hills Pastoral Company, Jericho QLD

Equipment: Caterpillar 12H Grader;

D6H Dozer;

D85 Komatsu Dozer;

and work utes & trucks

New Caterpillar 12H required scheduled oil sample (SOS) analysis by Hastings Deering under the terms of the manufacturer’s warranty.  As Bi-Tron is a pure petroleum mineral oil, it has not shown as an additive in these tests (such as Teflons or metals) therefore CANNOT void any manufacturer’s warranty.

In 2007 Bi-Tron Engine Treatment, Powertrain & Gear Formulation and Diesel Fuel Conditioner were introduced to the Caterpillar Grader. The machine had 700 hours operation on the clock beforehand.  The first oil sample after the addition of Bi-Tron products was taken at 1000 hours.  Results from this initial treatment below.

The 3^rd and 4^th oil samples showed a further reduction in these contaminants and wear factor.

Using the Caterpillar’s computerised fuel flow meters, fuel consumption was shown to be reduced from 16 litres per hour to 14.12 litres per hour – A reduction of 11.75%

Cyril Vale noted improved general performance, notably power and smoothness.

“I would recommend Bi-Tron in any machine as the fuel savings more than cover the cost of treatment”

Watch a VIDEO on Bi-Tron Tri-Wash & Protective Glaze

Bi-Tron Fuel Conditioner Advanced Formula combines Bi-Tron’s proprietary metal treatment technology with an amazing new Long Chain Polymer combustion enhancer for optimum fuel efficiency.  The new formula also includes a full package of highly concentrated additives to clean and protect fuel injectors, combustion chambers, intake valves and the entire fuel system. Other benefits are:

Bi-Tron Advanced Formula Fuel Conditioner

•Restores Lost Horsepower
•Improves Efficiency
•Removes Deposits from Injectors, Intake Valves, and Combustion Chambers
•Reduces Engine Hesitation and Stalling
•Reduces Fuel Deterioration
•Dissolves Gum, Soft Carbon and Varnish
•Lowers CO and Hydrocarbon Emissions
•Computer and Oxygen Sensor Safe!

Hear Natureline Chief Operating Officer Mark Wright on this exciting new product:

CLICK TO LISTEN NEW Fuel Conditioner introduction Mark Wright

Short of having a crystal ball, Gas-cost.net have created this one-year forecast on US fuel price movements.  Time will tell, but it’s a sobering observation.

Bi-Tron Diesel Conditioner helps keep fuel consumption to a minimum, read more here.

Bi-Tron Diesel Fuel Conditioner

Bi-Tron Diesel Conditioner

PRODUCT BENEFITS:

Oxygenates fuel; more complete combustion
Increases lubricity of fuel
Reduces moisture related problems
Increases fuel efficiency and combustion
Reduces gelling point & inhibits fungal growth
Protects pumps and injectors
Better mileage
Cleans & lubricates injectors and top-end
Minimizes pre-ignition and dieseling
Reduced exhaust emissions

Learn about Low Sulfur Diesel at the Bi-Tron industrial website extremelubrication.com (opens in a new window/tab)

Bi-Tron Engine Treatment

PRODUCT BENEFITS:

Quieter, smoother running engine
Greater fuel efficiency due to reduced friction
Easier cold weather starting
Improved engine response
Reduced exhaust emissions
Compatible with all motor oils

Bi-Tron Engine Treatment is unique 100% pure petroleum-based metal treatment that is compatible with all motor oils, including synthetics. Bi-Tron Engine Treatment is engineered specifically for the internal combustion engine. Gasoline, Diesel, Natural Gas or Propane, it makes no difference. It is a metal treatment which utilizes an SAE approved 10W30 base oil but is not intended to replace your engine’s oil. Your Engine oil contains a package of oil additives designed to perform a variety of tasks crucial to engine performance.

Bi-Tron Engine Treatment is engineered specifically for the internal combustion engine

Add 10% Bi-Tron Engine Treatment by volume to any larger crankcase during an oil change. If used for the first time, it is recommended to apply it at least 200 to 300 hundred miles before the next oil change, then apply it again at the next oil change.

• lower fuel and oil consumption
• Increased engine performance
• extends life of oil filters
• lower operating temperature and noise level
• eliminates 95 – 99% of engine wear
• the engine is protected in a wider range of temperatures

Bi-Tron Powertrain & Gear Formulation

Bi-Tron Powertrain & Gear Formulation

PRODUCT BENEFITS:

Smoother, faster shifting
Reduces noise and vibration
Reduces friction, wear & operating temperatures
Maximizes drive-train power and efficiency
Protects steering, transmission and differential
Prevents welding of ferrous and non-ferrous metals

Bi-Tron Powertrain & Gear Formulation as an additive to transmission fluids, hydraulic oils, compressor oils etc., contributes significantly to reduction in wear, amazing reduction in noise level and operating temperature. Bi-Tron Powertrain & Gear Formulation is an excellent dispersant and moisture repellent. Its performance is not affected by moisture dirt and abrasive dust.

Use Bi-Tron Powertrain & Gear Formulation in:

• Transmission fluids
• Hydraulic oils
• Compressor oils
• Refrigeration oils
• Arbor and form oils
• Way oils
• CP oils
• Gear lubes
• Cutting oils